SLIDING MITER FENCE (RIGHT) RYOBI - RIDGID 545114000

SLIDING MITER FENCE (RIGHT) RYOBI - RIDGID 545114000 Review

SLIDING MITER FENCE (RIGHT)

Ivy Classic 14" 108T Precision Miter & Trim

Ivy Classic 14" 108T Precision Miter & Trim Review

Ivy Classic 14" 108T Precision Miter & Trim

MITER GAGE KNOB RYOBI - RIDGID BD46095

MITER GAGE KNOB RYOBI - RIDGID BD46095 Review

MITER GAGE KNOB RYOBI - RIDGID BD46095 Feature

• Ridgid/Ryobi
• BD46095
• MITER GAGE KNOB
• Replacement Part

MITER GAGE KNOB

Factory-Reconditioned Ryobi ZRRTS20 15 Amp 10-in Portable Table Saw with QuickSTAND

Factory-Reconditioned Ryobi ZRRTS20 15 Amp 10-in Portable Table Saw with QuickSTAND Review

Factory-Reconditioned Ryobi ZRRTS20 15 Amp 10-in Portable Table Saw with QuickSTAND Feature

• Powerful 15 Amp motor
• Tool less QuickSTAND for easy set up and breakdown
• Expanded rip capacity, 25-in to the right of the balde and 12-in to the left of the blade
• On-board storage of miter gauge, rip fence and push stick
• Dust bag helps keep your work area clean

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 15 Amp 10-in Portable Table Saw with QuickSTAND - ZRRTS20, QuickSTAND, Miter Gauge, Rip Fence, Dust Bag

Triton TC12DBSMS 15-Amp 12-Inch Double Bevel Compound Sliding Miter Saw

Triton TC12DBSMS 15-Amp 12-Inch Double Bevel Compound Sliding Miter Saw Review

Triton TC12DBSMS 15-Amp 12-Inch Double Bevel Compound Sliding Miter Saw Feature

• The Triton 12-Inch double bevel slider with redeye laser line generator provides improved operator cutting vision, accuracy of cut, faster set up, and increased safety of operation
• Provides bevel cuts from 0-to 45-degrees left and right and miter cuts 0-to 52-Degrees left and right which allows a full range of miter cuts
• Features positive miter table stops for fast and convenient setting of common miter cuts and double bar slide system for an extended cutting capacity and greater accuracy
• Includes work-Piece cl-Amp, side support arms, dust bag, blade wrench, and 12-Inch 60 tct blade
• Backed by 3-year warranty; ships at 57-3/5-Pound

The Triton Double Bevel Miter Saw has the capability to increase productivity by cutting both left and right 45deg . Double-bar sliding system increases cutting capacity and improves accuracy, while positive miter stops offer fast settings of common miter cuts from 0deg to 52deg . The TC12DBSMS features dual laser lines on both sides of blade for improved visibility, accuracy and speed. Amps: 15, Cutting Capacity - 0 Degree Miter: 3 3/4in. H x 12in. D, Blade Diameter (in.): 12, Bevel: Yes (dual), Speed - No Load (RPM): 5,000, Total Positive Miter Stops: 11, Max. Degree Miter Cuts - Left: 52, Max. Degree Miter Cuts - Right: 52, Total Positive Bevel Stops: 4, Max. Degree Bevel Cuts - Left: 45, Max. Degree Bevel Cuts - Right: 45, Fence: Adjustable, Electric Brake: Yes, Arbor Size (in.): 1, Laser Guide: Yes (dual), Blade Included: Yes, Wrench Included: Yes, Dust Bag Included: Yes, Dimensions L x W x H (in.): 38 x 23 x 20

Factory-Reconditioned Ryobi ZRTSS100L 13 Amp 10-in Sliding Miter Saw with Laser

Factory-Reconditioned Ryobi ZRTSS100L 13 Amp 10-in Sliding Miter Saw with Laser Review

Factory-Reconditioned Ryobi ZRTSS100L 13 Amp 10-in Sliding Miter Saw with Laser Feature

• Heavy-duty 13 Amp motor for the most demanding applications; Electric brake stops the blade in seconds
• Carbide-tipped blade provides a smooth, clean cut; 9 Positive miter stops with ball and detent action for precision cuts
• Right and left table extensions provide extra support when working with longer work pieces. Ergonomic handle with overmold for user comfort
• Spindle lock for easy single wrench blade changes. Exactline laser guide gives you a cut reference line. Cord-wrap area provided for quick storage
• Dust guide and dust bag included helps keep work areas clean

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 13 Amp 10-in Sliding miter Saw with Laser - ZRTSS100L, Carbide-tipped blade, Table Extensions, Work Clamp, Blade Wrench, Dust Bag, Clamp Brackets, Operator's Manual

Festool KS 120 Dual Compound Sliding Miter Saw + CT 36 E Dust Extractor Package

Festool KS 120 Dual Compound Sliding Miter Saw + CT 36 E Dust Extractor Package Review

Festool KS 120 Dual Compound Sliding Miter Saw + CT 36 E Dust Extractor Package Feature

• The new CT36 incorporates increased capacity, innovation and versatility into this new design
• The Festool Kapex miter saw comes with Festool's high-quality 60-tooth carbide blade
• Festool KS 120 Dual Compound Sliding Miter Saw + CT 36 E Dust Extractor Package
• Save a bundle over buying the tools individually!
• Festool products can only be sold in the 50 states.

Festool Dust Extractor CT36 Hep: The new CT36 incorporates increased capacity, innovation and versatility into this new design. With the dual mode power activation, the user chooses either a tool activated or manual activated start-up. This CT (Cleantec) unit is extremely mobile, with a sturdy chassis, extra large low abrasion rear tires, and double swivel casters up front to easily negotiate any obstacle. The Festool Kapex miter saw comes with Festools high-quality 60-tooth carbide blade for use when cutting woods or soft plastics , the angle transfer device, a hold-down clamp for securing material, and a wrench for unit adjustments. Compact and lightweight at 21.5 kg (47 lbs). Use the fine adjustment knob to control bevel angles in fractions of a degree. The bevel knob has three settings: positive detents at 0 and -45 degrees, free movement between -45 and +45 degrees, and free movement up to +/- 47 degrees. Bevels can be made to the left or right, and the bevel gauge appears on both sides of the saw. The Kapex blade creates a thin kerf which reduces load on the motor and improves the cut quality. The blades are specially designed to reduce noise levels and dampen vibration. The large 30mm arbor hole reduces blade deflection. A special cutting position allows the Kapex to have a cutting capacity as large as 4-3/4" (120mm). The deck height of the Kapex matches the height of our Systainer 1 storage containers. Features Festools patented FastFix blade change system. Turning the FastFix knob locks the arbor, mechanically locks out the trigger, and allows the blade to be changed with a single hand. Dual-line lasers define the entire cut area. Festool products can only be sold in the 50 states.

Freud LU87R010 10-Inch 24-Tooth FTG Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Freud LU87R010 10-Inch 24-Tooth FTG Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating Review

Freud LU87R010 10-Inch 24-Tooth FTG Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating Feature

• Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
• Thin kerf requires less power and allows for faster feed rate. Ideal for saws under 3 HP.
• Laser cut anti-vibration slots reduces the vibration that resonates in standard blades extending the blade life.
• Tri-Metal Brazing for impact-resistant tips and precision tensioning keep the blades flat and true.
• Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up

The Freud Difference
Freud manufactures some of the most innovative, technologically advanced saw blades in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo -- a combination of titanium and cobalt. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. By overseeing the entire manufacturing process from start to finish, Freud guarantees some of the highest quality, most advanced products in the industry.

About Freud's Industrial Blades
Freud’s Industrial Series of blades are designed for the serious woodworker. Available in a variety of styles for different applications, LU and LM blades feature thick carbide tips, precision tensioned bodies and other premium features found in every Freud blade. Industrial blades include red Perma-Shield coating or Silver ICE coating to help reduce friction, heat build-up and gumming, which add up to mean longer blade life.

About the 10-Inch 24-Tooth FTG Thin Kerf Ripping Saw Blade
This exceptional Freud blade requires less energy to feed the material into the saw blade, and eases the strain on your power tool. The "fusion" tooth design gives glass smooth side finishes as well as a chip-free top and bottom during both ripping and crosscutting applications; and the Perma-Shield permanent non-stick coating reduces friction, protecting this thin kerf saw blade against corrosion, gumming and pitch build-up. This laser blade made from high-strength steel is built for long life and precision, and it comes pre-tensioned to remain flat through the shocks from cutting and stresses from turning at high speeds. Its anti-vibration reed design eliminates all vibration and produces the cleanest cuts possible, making the use of a stabilizer unnecessary.

Applications
This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-Shield coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4 to 2-3/4-inch thick wood, plywood, laminate, or chip board.

Key Technical Specs

• TiCo Hi-Density Carbide with Titanium
• Ideal for saws under 3 horsepower
• Tri-Metal Brazing for impact-resistant tips
• Non-stick Perma-Shield coating

Warranty
This blade is covered by Freud's limited lifetime warranty. This flat tooth rip blade gives new life to underpowered table saws and radial-arm saws because the thin kerf does not require much horsepower. The red Perma-Shield coating helps this 10" blade pull 1/3 less on the saw, which translates into over 33 more cutting power. The ideal working range is from 3/4" to 2-3/4" thick. 5/8" arbor .094 kerf

Makita 792736-2 10-Inch 24 Tooth ATB Ripping Saw Blade with 5/8-Inch Arbor

Makita 792736-2 10-Inch 24 Tooth ATB Ripping Saw Blade with 5/8-Inch Arbor Review

Makita 792736-2 10-Inch 24 Tooth ATB Ripping Saw Blade with 5/8-Inch Arbor Feature

• 10" Carbide-Tipped Saw Blade for general purpose cuts.
• Thin Kerf design for a lighter cutting load and eliminates wasted material.
• Precision ground teeth permit a clean cutting surface and a longer blade life.
• 5/8" Arbor and a 5,990 maximum safe rpm speed.
• Fits Makita 2703, 5201NA and most 10" table saws.

The Makita 792736-2 is a 10-Inch 24-Tooth Carbide Tipped Miter Saw Blade. The blade is hand-hammered by skilled saw technicians for guaranteed flatness. The precision ground teeth permit a clean cutting surface and a long blade life. The hardened steel body prevents blade warping. It has ATAF (Alternate Top and Alternate Face) tooth design for ultra precision cutting.

The Japanese ultra thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss. It is fully hardened and expertly hand-tensioned steel saw plates for true cuts. The micro-grain carbide teeth are honed with up to 600 grit for a mirror finish. The Ultra-Coated blade provides reduced pitch build-up.

Features:

• 10-Inch Carbide-Tipped Saw Blade for general purpose cuts
• Thin Kerf design for a lighter cutting load and eliminates wasted material
• Precision ground teeth permit a clean cutting surface and a longer blade life
• 5/8-Inch Arbor and a 5,990 maximum safe rpm speed
• Fits Makita 2703, 5201NA and most 10-Inch table saws

What's In the Box:

• Makita 792736-2 10-Inch 24-Tooth Carbide Tipped Table Saw Blade

Bench Dog Tools 40-102 ProMax Cast Iron Router Table Extension

Bench Dog Tools 40-102 ProMax Cast Iron Router Table Extension Review

Bench Dog Tools 40-102 ProMax Cast Iron Router Table Extension Feature

• Fits all contractor-grade table saws and all right-tilt cabinet-grade table saws that have 27-Inch deep by 1-1/2-Inch thick cast iron tables.
• Included ProFence quickly dismounts and hangs on provided j-hooks while you use your tablesaw.
• Perfect for small shops.
• Includes router top, fence, and mounting hardware. ProPlate is sold separately. Plate opening 8-1/4 by 11-3/4.
• Limited Lifetime Warranty.

Expand your table saw's versatility by adding this industrial grade router table in place of the extension wing. Perfect for shops where space is tight, ProMAX includes a cast-iron top, Bench Dog's 28" ProFence, a miter gauge track that adjusts for a no-slop fit, and a solid aluminum insert plate that is pre-drilled to fit your specific router. If workspace is an issue, the ProMAX has you covered. Its dual fence slot configuration lets you rotate the fence and work from either side of the table to maximize surface area. Plus, with a third miter slot at its disposal, your table saw becomes perfectly equipped to handle crosscut sleds.

Select a package that includes a plate pre-drilled to mount your router,
which should fall into one of the four groups listed below.

Group A Routers:
Makita 1100; Milwaukee 5615-5624; DeWalt 616-618; Bosch 1617-1618; Rigid 2930 Combo Kit; Porter Cable 690, 890, 7529, 97529, 8529; Hitachi M12VC (Fixed & Kit).

Group B Routers:
DeWalt DW621, DW621k; Crafstman Standard; Freud FT1700E. 1702VCEK

Group C Routers:
Porter-Cable 7518,7519, 7538, & 7539; Milwaukee 5625-20; Triton TRA001 and MOF001

Group D Routers:
Bosch 1619-1619EVS, Freud FT2000; DeWalt 625

Or two options for Blank Plates: Standard and Large

Specifications:
* Table width: 27"
* Table depth: 16"
* Thickness: 1-1/2"
* Ship weight: 55 lbs.

MITER TABLE BASE RYOBI - RIDGID 608405000

MITER TABLE BASE RYOBI - RIDGID 608405000 Review

MITER TABLE BASE RYOBI - RIDGID 608405000 Feature

• Ridgid/Ryobi
• 608405000
• MITER TABLE BASE
• Replacement Part

MITER TABLE BASE

Chopmaster Signature Line 10" 90 Tooth Blade

Chopmaster Signature Line 10" 90 Tooth Blade Review

Chopmaster Signature Line 10" 90 Tooth Blade Feature

• Micro-grain carbide teeth
• Maximum runout of .001"/.002"
• Use with sliding compound miter and radial-arm saws
• 300% longer life
• 7/64" kerf

Maintain maximum stability for the best cut with a Forrest Chopmaster Saw Blade. Specially designed for sliding compound miter and radial-arm saws, grabbing and throwing of scrap cutoffs has been minimized with this design.This blade has a heavier than normal steel plate and a negative face hook. Its made with double-hard C-4 submicron carbide for up to 300 longer life. Each blade is hand-straightened to a runout of .001"/.002" for maximum cut quality The tooth style (4 points and flat) produces steady, clean cuts with no bottom splintering. Youll be delighted by the extra smooth, tight cuts youll get with this blade. The 10" blade has a 7/64" kerf and 5/8" arbor hole.

Hitachi 988922 15-Inch 80 Tooth ATB Miter Saw Blade with 1-Inch Arbor

Hitachi 988922 15-Inch 80 Tooth ATB Miter Saw Blade with 1-Inch Arbor Review

Hitachi 988922 15-Inch 80 Tooth ATB Miter Saw Blade with 1-Inch Arbor Feature

• 80-tooth finish blade
• 1" arbor
• Glass-Smooth cuts
• Perfect for hardwood and softwood
• Near perfect balance

SawBlade 15"x80th TCT ATB WOOD

Amana Tool A.G.E. Series MD10-806 Heavy Duty Miter/Double Miter 10-Inch x 80 Tooth 4 ATB+R 5/8 Bore Saw Blade

Amana Tool A.G.E. Series MD10-806 Heavy Duty Miter/Double Miter 10-Inch x 80 Tooth 4 ATB+R 5/8 Bore Saw Blade Review

Amana Tool A.G.E. Series MD10-806 Heavy Duty Miter/Double Miter 10-Inch x 80 Tooth 4 ATB+R 5/8 Bore Saw Blade Feature

• Perfect for glass smooth cuts in moldings, and picture frames.
• 10 Inch x 60 Teeth 4 Alternate Top Bevel followed by 1 Raker grind, -5 Degree Hook
• Laser cut expansion slots allowing the blade to expand and contract from heat preventing warpage
• Massive tool steel plate. Extra large European style carbide tips providing more resharpenings.
• Industrial Quality. Made in Germany.

The A.G.E. Series Heavy-Duty Single/Double Miter blades were designed especially for smooth compound miters cuts in moldings and picture frame stock for use in a miter box and single/double miter saws.This style blade is the best choice for picture frames and fine finish carpentry. Thinner miter blades have a tendency to flex, throwing off the mitre joint. Our Blades are stiffer and provide straight splinter-free cuts in wood and coated wood products.

Ryobi - Ridgid Replacment Part # 89037006038 HANDLE MITER GAGE

Ryobi - Ridgid Replacment Part # 89037006038 HANDLE MITER GAGE Review

Ryobi - Ridgid Replacment Part # 89037006038 HANDLE MITER GAGE Feature

• Ridgid/Ryobi
• 89037006038
• HANDLE MITER GAGE
• Replacement Part

HANDLE MITER GAGE

CMT 255.096.12 12" x 96 Tooth, 1" Bore, ITK, .110 Kerf, Fine Finish Miter Saw Blade

CMT 255.096.12 12" x 96 Tooth, 1" Bore, ITK, .110 Kerf, Fine Finish Miter Saw Blade Review

Need the best possible cuts in 2-sided laminates? Need to crosscut expensive veneer plywood with the absolute minimum waste? Need to make your cuts with speed, efficiency and the least possible demand on your saw? Then you need CMT's remarkable new ITK Fine Finish Blades. Available in sizes for your 10' or 12' saw, these blades feature alternate top bevel teeth with a razor-sharp 40º angle, a precision design that delivers incredibly clean cuts, even in two-sided melamine. Of course, tooth design is only one part of the cutting equation. You also need a balanced plate with laser cut arbors and slots to ensure true, vibration-free rotation, and CMT's ITK blades deliver all that and more! Our ITK blades feature micrograin carbide teeth, shock-resistant tri-metal brazing, our unique, illustrated resharpening instructions and laser-etched safety information on every blade.