Freud BL71MCE9 1-Inch to 5/8-Inch Saw Blade Bushing

Freud BL71MCE9 1-Inch to 5/8-Inch Saw Blade Bushing Review

Freud BL71MCE9 1-Inch to 5/8-Inch Saw Blade Bushing Feature

• Precision machined for best results
• For reduction in blade size arbor
• 1" outside diameter x 5/8" inside diameter

These precision bushings are designed to reduce the arbor size of Freud and other manufacturers saw blades. Application: For Reduction In Blade Arbor Size

Rockler Table Saw Crosscut Sled

Rockler Table Saw Crosscut Sled Review

Rockler Table Saw Crosscut Sled Feature

• 1/2'' thick 23-3/4'' x 23-3/4'' MDF table with melamine coating.
• Easy-to-read 1/2 graduations and a hair-line indicator ensure error-free setups.
• Extra material allows you to cut the sled down to fit your saw perfectly.
• Right edge of sled functions as a zero-clearance chip breaker.
• Includes four 2'' pieces of 3/4'' wide self-adhesive low-friction tape for smooth sliding of the platform and fence.

No more squinting at those tiny scales! This Crosscut Sled features a large protractor scale way out at the end of the fence, allowing you to precisely tune your angles for air-tight miters and crosscuts. Easy-to-read 1/2 graduations and a hair-line indicator ensure error-free setups. Spacious MDF surface works perfect for crosscutting large panels, while self-adhesive low-friction tape allows easy sliding. Heavy-duty aluminum fence features an adjustable MDF face and a sliding flip-down stop. An aluminum hold-down slides along a separate slot to prevent material from shifting during the cut. Spring-loaded ball bearings in the miter bar are adjustable for a no-slop fit to the track and smooth, accurate cuts.



Aluminum fence measures 3"H x 25"L.
MDF fence face measures 2-7/8"H x 27"L.
MDF Fence face can be removed for replacement.
Spring-loaded ball bearings in the miter bar have adjustable tension to eliminate slop.
Adjustable 90 stop.
Optional Crosscut Sled Drop-Off Platform also available.

Amana Tool Mamba Series MA12072 Finishing Compound Miter 12-Inch x 72 Tooth x ATB+F Grind 1-Inch Bore Saw Blade

Amana Tool Mamba Series MA12072 Finishing Compound Miter 12-Inch x 72 Tooth x ATB+F Grind 1-Inch Bore Saw Blade Review

Amana Tool Mamba Series MA12072 Finishing Compound Miter 12-Inch x 72 Tooth x ATB+F Grind 1-Inch Bore Saw Blade Feature

• Finishing Compound Miter: Wood, Veneered Plywood and Two-Sided Melamines
• 12-Inch x 72 Teeth, ATB+F Grind, 1-Inch Bore, 8-Degree Hook Angle
• Features thin-kerf design requiring less horsepower and hollow ground teeth that provide sharper cuts and extended blade life
• Specially Designed for Contractors
• Covered by Amana Tool's Lifetime Guarantee against saw blade material and workmanship defects, subject to guidelines

Mamba Thin Kerf Finishing Compound Miter 12-Inch Contractor Series Saw Blade

MITER INDICATOR RYOBI - RIDGID 644439000

MITER INDICATOR RYOBI - RIDGID 644439000 Review

MITER INDICATOR

Positec Usa-Master Mechanic Mm 10'Benchtoptable Saw 584 Stationary (Bench) Saws

Positec Usa-Master Mechanic Mm 10'Benchtoptable Saw 584 Stationary (Bench) Saws Review

Positec Usa-Master Mechanic Mm 10'Benchtoptable Saw 584 Stationary (Bench) Saws Feature

• Positec Usa-Master Mechanic #584153 MM 10"BenchTopTable Saw
• POSITEC USA-MASTER MECHANIC

Master Mechanic, 10', Bench Top Table Saw, 13A, 4500 RPM, Safety Switch, 26' x 16', Die Cast Aluminum Table Top, Quick Release Rip Fence, Miter Gauge, 0-45 Degree Bevel, Dust Port, Blade Guard, 2 Blade Wrenches & Push Stick.

Turn Buttons, 3/4" Length (10)

Turn Buttons, 3/4" Length (10) Review

Turn Buttons, 3/4" Length (10) Feature

• Hold your pictures securely in place while allowing for easy removal when required
• Quick and easy installation
• 10 per pack
• Screws included

No professional framing job is complete without turn buttons to hold the backing board and picture firmly in place. Theres no need for framers points. If you ever want to remove the picture, simply loosen the screws and turn the button. Most projects will require 6 or 8 buttons depending on the size of the frame. Bag of 10, bright metal, approximately 3/4" long. Screws included.

Factory-Reconditioned DEWALT DW715R Heavy-Duty 15 Amp 12-Inch Compound Miter saw

Factory-Reconditioned DEWALT DW715R Heavy-Duty 15 Amp 12-Inch Compound Miter saw Review

There are plenty of chop saws on the market, but there are a few features that set the DeWalt DW715 apart from the mitering crowd. First among them, we think, is the great detent override, because every corner in your workday is not a perfect 90 degrees. With most saws, it’s impossible to set a miter at 44.5 degrees, because you’ll slide right into the otherwise handy detent. But on this DeWalt, a simple override lets you lock into the exact – and we mean exact – angle you need to get the tightest fit. There are 11 miter detent stops, and arriving at them takes just a squeeze on the cam lever, which we like a whole lot more than the turnscrew knobs on other saws.

Running a close second is the machined base support for the tall sliding fence, which DeWalt promises will never give you anything but the ultimate accuracy. We like the extra height because it supports crown molding beautifully, even up to 5-1/4 inches nested and base molding up to 6-1/2 inches vertically. Need a bevel cut? The fence slides neatly out of the way for bevels, anywhere from 0 to 48 degrees on the left and 0 to 3 degrees on the right. (Of course, this is the single-bevel version; if it’s a double bevel saw you’re after, check out the DW716 and the amazing DW718.) You won’t hear any complaining from this motor no matter what you’re cutting, as it’s drawing a beefy 15 amps and an rpm of 3,600, slicing through 2-by oak like it’s paper.

If portability is a factor, there are few saws that rival this one, we think: It’s just 42 pounds despite its brawny power, and a smart designer incorporated easy-on-the-body handles into the base. Though it’s well-enough suited to the home workshop, this saw is at home at the jobsite. -- Kris Jensen-Van Heste

Freud LM72R012 12-Inch 30 Tooth FTG Glue Line Ripping Saw Blade with 1-Inch Arbor and PermaShield Coating

Freud LM72R012 12-Inch 30 Tooth FTG Glue Line Ripping Saw Blade with 1-Inch Arbor and PermaShield Coating Review

Freud LM72R012 12-Inch 30 Tooth FTG Glue Line Ripping Saw Blade with 1-Inch Arbor and PermaShield Coating Feature

• 12 inch 30TPI flat 1 inch arbor
• Excellent for finish cut with ripping hardwoods & softwoods
• Where speed is more important than smoothness of cut
• Gives good finish cut on lumber to be glued

Designed for serious woodworkers, the 12-inch Freud LM72R012 Heavy-Duty Rip Saw Blade features an ultra-tough Perma-SHIELD coating that reduces heat and friction. It delivers smooth, fast cuts through hard- and softwood. Thanks to a rigid blade body and 30 oversized, flat-top teeth with TiCo high-density carbide tips, this is one dependable, long-lasting blade. Plus, its well-balanced, anti-vibration design means there's no need to use stabilizers with it.

LM72R012 Heavy-Duty Rip Saw Blade with Perma-SHIELD At a Glance: Ideal for hard- or softwood that's 3/4 to 2-3/4 inches thick Heavy-duty plate with laser-cut, anti-vibration slots Tough Perma-SHIELD coating reduces friction and heat buildup Technical Specs: Coating Perma-SHIELD Diameter 12" Teeth 30 FLAT Arbor 1" Kerf (K) .169 Plate (P) .118

Depth of Cut

Extra Large, Flat Tooth Design leaves a smooth finish without the need for sanding or jointing Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life, and giving a crisp, swirl-free flawless finish

Professional-Grade Design for Accurate Glue Line Cuts
Offering fast, "glue line" precision cuts and an antikickback design, this heavy-duty rip saw blade handles tough industrial ripping tasks without requiring you to add any stabilizers to your setup. It's ideal for working with hard- or softwoods that are 3/4 to 2-3/4 inches thick, and it can be used in gang-rip operations. This versatile blade handles crosscuts with chipboard, plywood, or laminate, and can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 1-inch arbor and produces a 0.169 kerf.

The extra-large, flat teeth featured on this blade leave a smooth, splinter-free finish that eliminates the need for sanding and jointing. This large-tooth design also allows the blade to be safely sharpened more times, prolonging the life of the blade and saving you money. And the large gullets between these teeth ensure easy chip removal.

Well-Balanced, Anti-Vibration Design
This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use.

High-Density Carbide for Maximum Cutting Performance
This heavy-duty rip saw blade's 30 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide "ripping blend." This blend offers a mix of improved density, hardness, corrosion resistance, heat resistance, and impact resistance that's ideally matched to the demands of ripping large quantities of thick, hard wood.

With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--once again, saving you time and money.

Perma-SHIELD Coating Reduces Friction and Heat Buildup
Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.

As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or "pitch" buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud's limited lifetime warranty.

About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What's in the Box
Freud LM72R012 Heavy-Duty Rip Saw Blade with Perma-SHIELD--12-inch diameter, 1-inch arbor, 30-tooth design.

This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. These blades are precision balanced and can be used in gang-rip operations. the ideal working range is from 3/4" to 2-3/4" thick. This blade also features laser cut anti-vibration slots, practically elimination the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers. Application: Smooth, Fast Ripping

DELTA 34-568 Miter Gauge Clamp

DELTA 34-568 Miter Gauge Clamp Review

DELTA 34-568 Miter Gauge Clamp Feature

• Holds work evenly and safely when edge shaping with miter gage. 1 1/2 lbs.
• Securely clamps your work piece for more accuracy when cutting
• Weighs 1-1/3-Pound
• Included is a clamp bar, front and rear mounting posts and two sliding clamps
• Weighs 1-1/3-Pound shipped

The DELTA 34-568 Miter Gauge Clamp helps you increase the accuracy of your miter gauge. It attaches to the DELTA 34-895 miter gauge and lets you clamp your workpiece more securely, allowing for more accurate cuts. Included is a clamp bar, front and rear mounting posts, and two sliding clamps. Includes Clamp Attachment for Miter Gauge - 34-568, Clamp Bar, (2) Sliding Clamp Screws, Front & Rear Posts

MITER SCALE RYOBI - RIDGID 630788002

MITER SCALE RYOBI - RIDGID 630788002 Review

MITER SCALE RYOBI - RIDGID 630788002 Feature

• Ridgid/Ryobi
• 630788002
• MITER SCALE
• Replacement Part

MITER SCALE

MITER GAGE ASSY, RYOBI - RIDGID A182010802

MITER GAGE ASSY, RYOBI - RIDGID A182010802 Review

MITER GAGE ASSY,

Makita A-90532 12-Inch 60-Teeth Dry Ferrous Metal Cutting Saw Blade with 1-Inch Arbor

Makita A-90532 12-Inch 60-Teeth Dry Ferrous Metal Cutting Saw Blade with 1-Inch Arbor Review

Makita A-90532 12-Inch 60-Teeth Dry Ferrous Metal Cutting Saw Blade with 1-Inch Arbor Feature

• Fits Makita model LC1230 metal cutting saw

Eagerly tackles the toughest jobs. Blade Diameter (in.): 12, Recommended Use: Black and cast iron pipe, tubing, conduit, threaded rod, angle iron, channel, UNISTRUT , Blade Use: Dry, Blades (qty.): 1

Ultimate Hobby Knife & Miter Saw Cutting Craft Set

Ultimate Hobby Knife & Miter Saw Cutting Craft Set Review

This may be the last hobby cutting set you need to buy – this set is packed full of goodies from a razor sharp steel saw and miter box to surgical-steel blades with different sized handles this set has you covered.Features: Mini miter-box and fine-tooth stainless steel saw for easy angle cuts Small medium and large knife handles with firm-grip blade collets 30 razor-sharp surgical-steel blades in six different styles and sizes Awl-pick handle Tweezer and sanding block All in custom-fit wooden storage box

Black & Decker 10" 32 Tooth Piranha Carbide Blade, Fast Cutting

Black & Decker 10" 32 Tooth Piranha Carbide Blade, Fast Cutting Review

Black & Decker 10" 32 Tooth Piranha Carbide Blade, Fast Cutting Feature

• 32 teeth
• Carbide Teeth
• 10"
• Fast cutting
• Great for ripping

Piranha circular saw blades are offered in sizes from 5-1/2 to 10 inches in diameter for the most common applications. They are offered with a variety of tooth counts to do everything from fast cut ripping to general purpose cutting to fine finishing. An aggressive tooth geometry and ultra thin kerfs allow the blade to cut through a variety of materials faster while the heat treatment gives the blade longer life than traditional carbide blades. Product Description For large-volume, heavy-duty cutting; fast rips, crosscuts and miters. Cuts all types of wood, plywood, particleboard, chipboard, Masonite, wallboard and plastics. Fish hook gullet design removes chips more effectively; extremely sharp, curved carbide teeth eliminate tooth drag for a smoother, faster cut. Reinforced shoulder for greater durability; expansion slots for improved accuracy (except on 5-1/2" No.77-715 and 6-1/2" No.77-716 blades). Requires less force, is easier on the saw, makes less noise, runs cooler, creates fewer chips, allows for more accurate cutting, and lasts up to 50 times longer than steel blades. Resharpenable. Coated to resist residue. Alternative tooth bevel.

Irwin 11670 10-Inch 80 Tooth Hollow Ground Planer Steel Saw Blade with 5/8-Inch Arbor

Irwin 11670 10-Inch 80 Tooth Hollow Ground Planer Steel Saw Blade with 5/8-Inch Arbor Review

Irwin 11670 10-Inch 80 Tooth Hollow Ground Planer Steel Saw Blade with 5/8-Inch Arbor Feature

• Precision ground teeth for smooth, accurate cuts
• Fully hardened plate runs truer longer
• Heavy gauge, high carbon steel for extended life

Fully hardened plate runs truer longer. Precision ground teeth for smooth accurate cuts. Heavy gauge high carbon steel for extended life. Fully flattened plate for fast accurate cuts.